|
| Fine
Thermocouple
|
 |
 |
25 micron Thermocouple |
50 micron Thermocouple |
|
Insulation
Glass
Teflon
Ceramic |
Original
wire dia.
100 micron
200 micron
320 micron |
Tip
wire dia.
13 micron
25 micron
50 micron |
The
tip is a welded joint, not a large ball as used on
conventional Thermocouples, resulting in a very low heat
capacity and fast response.
The small contact area also makes the
tip easy to bond.
(1) Characteristic Points of our Fine
Thermocouples
-
You can easily bond this Fine Thermocouple to small components,
for example 0.3 mm pitch QFP lead, 1005 ceramic chip or Flip Chip
etc.
-
With the minimum heat capacity, you can achieve the highest response
and accuracy.
-
Fine and flexible tip Thermocouples can be bonded
easily using
Ag paste.
(2)
Specification of Fine Thermocouples
-
K
type (Chromel Almel) bare wire thermocouples
-
Insulated
Thermocouple wire: Glass, Teflon and Ceramic Insulation
Wire Dia. : 100 micron, 200 micron and 320 micron
Length : You can specify any length.
-
Tip : Wire Dia. : 13 micron, 25 micron, 50 micron
Standard Length 10 mm +/-3 mm. However, we can manufacture
to your specifications, provided they are between 5 mm -
20 mm. This service is free of charge.
3)
Model No and Price Detail
(4)
Example of how our Fine Thermocouples are helping our
customers solve their problems through fast response and high
accuracy temperature measurement. Detail
(5)
Accuracy experiment result using bare wire thermocouples Detail
|
ANBETHERM.
